[ Mar 18 02:25:59 Enabled. ]
[ Mar 18 02:25:59 Rereading configuration. ]
[ Mar 18 02:26:01 Rereading configuration. ]
[ Mar 18 02:26:10 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.770334298Z","hostname":"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4","pid":23499,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.772824399Z","hostname":"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4","pid":23499,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.779995293Z","hostname":"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4","pid":23499}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.783041301Z","hostname":"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4","pid":23499}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:10.786049606Z","hostname":"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4","pid":23499,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:11.252976915Z","hostname":"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4","pid":23499,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T02:26:11.286948023Z","hostname":"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4","pid":23499,"zonename":"\"oxz_oximeter_9e2b51e7-b954-4815-9646-0da06f5df7e4\""}
[ Mar 18 02:26:11 Method "start" exited with status 0. ]