[ Mar 18 11:23:14 Enabled. ]
[ Mar 18 11:23:14 Rereading configuration. ]
[ Mar 18 11:23:17 Rereading configuration. ]
[ Mar 18 11:23:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T11:23:21.522833021Z","hostname":"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb","pid":24391,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T11:23:21.531621862Z","hostname":"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb","pid":24391,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T11:23:21.542143001Z","hostname":"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb","pid":24391}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T11:23:21.546491041Z","hostname":"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb","pid":24391}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T11:23:21.551845023Z","hostname":"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb","pid":24391,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T11:23:22.020525438Z","hostname":"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb","pid":24391,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T11:23:22.037091236Z","hostname":"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb","pid":24391,"zonename":"\"oxz_crucible_55f80737-225b-4280-9b07-f8a090a0c6eb\""}
[ Mar 18 11:23:22 Method "start" exited with status 0. ]