[ Mar 18 18:23:06 Enabled. ]
[ Mar 18 18:23:06 Rereading configuration. ]
[ Mar 18 18:23:06 Rereading configuration. ]
[ Mar 18 18:23:07 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T18:23:07.326685752Z","hostname":"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a","pid":6449,"datalink":"oxControlService4"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T18:23:07.331173251Z","hostname":"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a","pid":6449,"datalink":"oxControlService4"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T18:23:07.33706942Z","hostname":"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a","pid":6449}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T18:23:07.339967678Z","hostname":"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a","pid":6449}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T18:23:07.342454261Z","hostname":"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a","pid":6449,"static address":"fd00:1122:3344:101::1b","data link":"\"oxControlService4\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T18:23:07.796232849Z","hostname":"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a","pid":6449,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T18:23:07.801221465Z","hostname":"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a","pid":6449,"zonename":"\"oxz_ntp_b2a7048c-a893-40f5-a628-93770b98a56a\""}
[ Mar 18 18:23:07 Method "start" exited with status 0. ]