[ Mar 18 23:13:36 Enabled. ]
[ Mar 18 23:13:36 Rereading configuration. ]
[ Mar 18 23:13:39 Rereading configuration. ]
[ Mar 18 23:13:45 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T23:13:45.544969492Z","hostname":"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b","pid":23103,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T23:13:45.545212108Z","hostname":"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b","pid":23103,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T23:13:45.551525912Z","hostname":"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b","pid":23103}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T23:13:45.555127125Z","hostname":"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b","pid":23103}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T23:13:45.558697127Z","hostname":"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b","pid":23103,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T23:13:46.038513755Z","hostname":"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b","pid":23103,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-18T23:13:46.057807293Z","hostname":"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b","pid":23103,"zonename":"\"oxz_crucible_7be083ba-e367-4146-a341-9c8d1998c52b\""}
[ Mar 18 23:13:46 Method "start" exited with status 0. ]