[ Mar 19 07:54:17 Enabled. ]
[ Mar 19 07:54:17 Rereading configuration. ]
[ Mar 19 07:54:18 Rereading configuration. ]
[ Mar 19 07:54:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T07:54:21.614781122Z","hostname":"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a","pid":22938,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T07:54:21.625131476Z","hostname":"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a","pid":22938,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T07:54:21.636135781Z","hostname":"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a","pid":22938}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T07:54:21.640459739Z","hostname":"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a","pid":22938}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T07:54:21.645764624Z","hostname":"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a","pid":22938,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T07:54:22.107023043Z","hostname":"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a","pid":22938,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T07:54:22.122520799Z","hostname":"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a","pid":22938,"zonename":"\"oxz_crucible_d5b21499-1d4a-43d0-8667-7e6c0e6e829a\""}
[ Mar 19 07:54:22 Method "start" exited with status 0. ]