[ Mar 19 08:26:11 Enabled. ]
[ Mar 19 08:26:11 Rereading configuration. ]
[ Mar 19 08:26:13 Rereading configuration. ]
[ Mar 19 08:26:15 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:15.675192342Z","hostname":"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64","pid":24331,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:15.687570405Z","hostname":"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64","pid":24331,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:15.701787011Z","hostname":"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64","pid":24331}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:15.710486286Z","hostname":"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64","pid":24331}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:15.717036197Z","hostname":"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64","pid":24331,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.183482722Z","hostname":"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64","pid":24331,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.199336986Z","hostname":"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64","pid":24331,"zonename":"\"oxz_crucible_46c10875-2c2f-4ff0-b2f8-ff9ad2e82d64\""}
[ Mar 19 08:26:16 Method "start" exited with status 0. ]