[ Mar 19 08:26:12 Enabled. ]
[ Mar 19 08:26:12 Rereading configuration. ]
[ Mar 19 08:26:13 Rereading configuration. ]
[ Mar 19 08:26:16 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.418534983Z","hostname":"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8","pid":24704,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.427901347Z","hostname":"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8","pid":24704,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.440216608Z","hostname":"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8","pid":24704}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.444559385Z","hostname":"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8","pid":24704}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.448319735Z","hostname":"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8","pid":24704,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.906165337Z","hostname":"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8","pid":24704,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T08:26:16.918441497Z","hostname":"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8","pid":24704,"zonename":"\"oxz_oximeter_a482bd3c-115b-4516-807f-60729b5529c8\""}
[ Mar 19 08:26:16 Method "start" exited with status 0. ]