[ Mar 19 18:13:34 Enabled. ]
[ Mar 19 18:13:34 Rereading configuration. ]
[ Mar 19 18:13:35 Rereading configuration. ]
[ Mar 19 18:13:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.083559431Z","hostname":"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9","pid":25211,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.091555102Z","hostname":"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9","pid":25211,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.100502701Z","hostname":"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9","pid":25211}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.105455514Z","hostname":"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9","pid":25211}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.109882838Z","hostname":"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9","pid":25211,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.572354334Z","hostname":"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9","pid":25211,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.589385816Z","hostname":"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9","pid":25211,"zonename":"\"oxz_crucible_0c701c5a-b030-4b3e-9a55-19a8c8c672a9\""}
[ Mar 19 18:13:38 Method "start" exited with status 0. ]