[ Mar 19 18:13:34 Enabled. ]
[ Mar 19 18:13:34 Rereading configuration. ]
[ Mar 19 18:13:35 Rereading configuration. ]
[ Mar 19 18:13:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:37.535209023Z","hostname":"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3","pid":24936,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:37.542436279Z","hostname":"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3","pid":24936,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:37.552803465Z","hostname":"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3","pid":24936}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:37.556300501Z","hostname":"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3","pid":24936}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:37.561419058Z","hostname":"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3","pid":24936,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.023805822Z","hostname":"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3","pid":24936,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-19T18:13:38.038258405Z","hostname":"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3","pid":24936,"zonename":"\"oxz_crucible_4c32d075-0d2c-4dcb-a303-c7c8f7165cd3\""}
[ Mar 19 18:13:38 Method "start" exited with status 0. ]