[ Mar 20 17:50:07 Enabled. ]
[ Mar 20 17:50:07 Rereading configuration. ]
[ Mar 20 17:50:08 Rereading configuration. ]
[ Mar 20 17:50:11 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-20T17:50:11.254843936Z","hostname":"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637","pid":23829,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-20T17:50:11.264182882Z","hostname":"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637","pid":23829,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-20T17:50:11.276127959Z","hostname":"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637","pid":23829}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-20T17:50:11.279913047Z","hostname":"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637","pid":23829}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-20T17:50:11.283808258Z","hostname":"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637","pid":23829,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-20T17:50:11.745903485Z","hostname":"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637","pid":23829,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-20T17:50:11.761447456Z","hostname":"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637","pid":23829,"zonename":"\"oxz_crucible_a37f8c52-7376-47c8-aa87-64ff24a61637\""}
[ Mar 20 17:50:11 Method "start" exited with status 0. ]