| 1 | | [ Mar 20 19:54:54 Enabled. ] |
| 2 | | [ Mar 20 19:54:54 Rereading configuration. ] |
| 3 | | [ Mar 20 19:54:56 Rereading configuration. ] |
| 4 | | [ Mar 20 19:55:01 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::8 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-20T19:55:01.389Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService26
|
| 7 | 2026-03-20T19:55:01.394Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService26
|
| 8 | 2026-03-20T19:55:01.401Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-20T19:55:01.404Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-20T19:55:01.408Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService26"
static address = fd00:1122:3344:101::8
|
| 11 | 2026-03-20T19:55:01.874Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-20T19:55:01.886Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_external_dns_fe70675f-82d5-4876-9c00-ff94cdca9654"
|
| 13 | | [ Mar 20 19:55:01 Method "start" exited with status 0. ] |