[ Mar 24 20:56:46 Enabled. ]
[ Mar 24 20:56:46 Rereading configuration. ]
[ Mar 24 20:56:49 Rereading configuration. ]
[ Mar 24 20:56:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T20:56:54.257917052Z","hostname":"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177","pid":23908,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T20:56:54.263660056Z","hostname":"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177","pid":23908,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T20:56:54.270783605Z","hostname":"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177","pid":23908}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T20:56:54.273689173Z","hostname":"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177","pid":23908}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T20:56:54.277091295Z","hostname":"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177","pid":23908,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T20:56:54.745458462Z","hostname":"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177","pid":23908,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T20:56:54.769763047Z","hostname":"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177","pid":23908,"zonename":"\"oxz_oximeter_a309df7c-2a20-4201-8e80-eb9f7e355177\""}
[ Mar 24 20:56:54 Method "start" exited with status 0. ]