[ Mar 24 22:28:49 Enabled. ]
[ Mar 24 22:28:49 Rereading configuration. ]
[ Mar 24 22:28:51 Rereading configuration. ]
[ Mar 24 22:28:56 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T22:28:56.175187185Z","hostname":"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60","pid":24055,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T22:28:56.184387497Z","hostname":"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60","pid":24055,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T22:28:56.195596941Z","hostname":"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60","pid":24055}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T22:28:56.200389719Z","hostname":"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60","pid":24055}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T22:28:56.205920049Z","hostname":"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60","pid":24055,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T22:28:56.664859996Z","hostname":"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60","pid":24055,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-24T22:28:56.676316907Z","hostname":"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60","pid":24055,"zonename":"\"oxz_crucible_d48ee406-2c58-43d6-9d57-845e8719bf60\""}
[ Mar 24 22:28:56 Method "start" exited with status 0. ]