[ Mar 25 00:15:34 Enabled. ]
[ Mar 25 00:15:34 Rereading configuration. ]
[ Mar 25 00:15:35 Rereading configuration. ]
[ Mar 25 00:15:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T00:15:37.841052109Z","hostname":"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2","pid":27219,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T00:15:37.847913786Z","hostname":"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2","pid":27219,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T00:15:37.858883408Z","hostname":"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2","pid":27219}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T00:15:37.864371004Z","hostname":"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2","pid":27219}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T00:15:37.869358209Z","hostname":"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2","pid":27219,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T00:15:38.331367285Z","hostname":"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2","pid":27219,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T00:15:38.343908713Z","hostname":"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2","pid":27219,"zonename":"\"oxz_oximeter_ab3a599b-ce1a-4d3c-9a78-431b946ffaf2\""}
[ Mar 25 00:15:38 Method "start" exited with status 0. ]