[ Mar 25 17:06:54 Enabled. ]
[ Mar 25 17:06:54 Rereading configuration. ]
[ Mar 25 17:06:56 Rereading configuration. ]
[ Mar 25 17:07:01 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T17:07:01.5805943Z","hostname":"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a","pid":23064,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T17:07:01.591372555Z","hostname":"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a","pid":23064,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T17:07:01.606628331Z","hostname":"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a","pid":23064}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T17:07:01.61185433Z","hostname":"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a","pid":23064}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T17:07:01.616538126Z","hostname":"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a","pid":23064,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T17:07:02.088298207Z","hostname":"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a","pid":23064,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-25T17:07:02.108358061Z","hostname":"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a","pid":23064,"zonename":"\"oxz_oximeter_3d76ce6e-031e-4bfb-87d3-52d360a7472a\""}
[ Mar 25 17:07:02 Method "start" exited with status 0. ]