| 1 | | [ Mar 26 05:44:55 Enabled. ] |
| 2 | | [ Mar 26 05:44:55 Rereading configuration. ] |
| 3 | | [ Mar 26 05:44:55 Rereading configuration. ] |
| 4 | | [ Mar 26 05:44:56 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService6 -s fd00:1122:3344:101::3 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-26T05:44:56.395Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService6
|
| 7 | 2026-03-26T05:44:56.398Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService6
|
| 8 | 2026-03-26T05:44:56.405Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-26T05:44:56.408Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-26T05:44:56.410Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService6"
static address = fd00:1122:3344:101::3
|
| 11 | 2026-03-26T05:44:56.867Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-26T05:44:56.874Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_cockroachdb_52acfbf1-ce1b-4388-9e39-567a527872ff"
|
| 13 | | [ Mar 26 05:44:56 Method "start" exited with status 0. ] |