[ Mar 26 15:17:39 Enabled. ]
[ Mar 26 15:17:39 Rereading configuration. ]
[ Mar 26 15:17:41 Rereading configuration. ]
[ Mar 26 15:17:47 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:47.966507155Z","hostname":"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5","pid":23830,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:47.972171579Z","hostname":"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5","pid":23830,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:47.979128599Z","hostname":"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5","pid":23830}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:47.982201518Z","hostname":"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5","pid":23830}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:47.985885856Z","hostname":"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5","pid":23830,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.445462265Z","hostname":"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5","pid":23830,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.452717919Z","hostname":"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5","pid":23830,"zonename":"\"oxz_crucible_39e4fb74-fb04-4fe5-aeb8-aaa1574f62a5\""}
[ Mar 26 15:17:48 Method "start" exited with status 0. ]