[ Mar 26 15:17:39 Enabled. ]
[ Mar 26 15:17:39 Rereading configuration. ]
[ Mar 26 15:17:42 Rereading configuration. ]
[ Mar 26 15:17:48 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.207199873Z","hostname":"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611","pid":23990,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.212473934Z","hostname":"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611","pid":23990,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.219567946Z","hostname":"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611","pid":23990}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.223053091Z","hostname":"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611","pid":23990}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.226218492Z","hostname":"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611","pid":23990,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.682351916Z","hostname":"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611","pid":23990,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-26T15:17:48.690562583Z","hostname":"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611","pid":23990,"zonename":"\"oxz_oximeter_4f0f2d8b-6dd2-4273-a6e6-be0b795ba611\""}
[ Mar 26 15:17:48 Method "start" exited with status 0. ]