| 1 | | [ Mar 30 18:58:20 Enabled. ] |
| 2 | | [ Mar 30 18:58:20 Rereading configuration. ] |
| 3 | | [ Mar 30 18:58:22 Rereading configuration. ] |
| 4 | | [ Mar 30 18:58:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-30T18:58:27.039Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService21
|
| 7 | 2026-03-30T18:58:27.049Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService21
|
| 8 | 2026-03-30T18:58:27.060Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-30T18:58:27.065Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-30T18:58:27.069Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService21"
static address = fd00:1122:3344:101::17
|
| 11 | 2026-03-30T18:58:27.536Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-30T18:58:27.555Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_80f1fd80-e656-4782-97bf-297d08d404fd"
|
| 13 | | [ Mar 30 18:58:27 Method "start" exited with status 0. ] |