[ Mar 30 18:58:21 Enabled. ]
[ Mar 30 18:58:21 Rereading configuration. ]
[ Mar 30 18:58:22 Rereading configuration. ]
[ Mar 30 18:58:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T18:58:26.980057221Z","hostname":"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738","pid":23545,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T18:58:26.986584225Z","hostname":"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738","pid":23545,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T18:58:26.995921772Z","hostname":"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738","pid":23545}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T18:58:27.000303126Z","hostname":"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738","pid":23545}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T18:58:27.006312913Z","hostname":"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738","pid":23545,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T18:58:27.473458709Z","hostname":"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738","pid":23545,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T18:58:27.493304441Z","hostname":"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738","pid":23545,"zonename":"\"oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738\""}
[ Mar 30 18:58:27 Method "start" exited with status 0. ]