| 1 | | [ Mar 30 18:58:21 Enabled. ] |
| 2 | | [ Mar 30 18:58:21 Rereading configuration. ] |
| 3 | | [ Mar 30 18:58:22 Rereading configuration. ] |
| 4 | | [ Mar 30 18:58:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-30T18:58:26.980Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService23
|
| 7 | 2026-03-30T18:58:26.986Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService23
|
| 8 | 2026-03-30T18:58:26.995Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-30T18:58:27.000Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-30T18:58:27.006Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService23"
static address = fd00:1122:3344:101::16
|
| 11 | 2026-03-30T18:58:27.473Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-30T18:58:27.493Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_ecfa1686-1dcc-4867-9396-5dde0cfe9738"
|
| 13 | | [ Mar 30 18:58:27 Method "start" exited with status 0. ] |