[ Mar 30 19:27:32 Enabled. ]
[ Mar 30 19:27:32 Rereading configuration. ]
[ Mar 30 19:27:34 Rereading configuration. ]
[ Mar 30 19:27:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:37.521892603Z","hostname":"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6","pid":24202,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:37.528892515Z","hostname":"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6","pid":24202,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:37.542547567Z","hostname":"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6","pid":24202}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:37.546427561Z","hostname":"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6","pid":24202}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:37.552226873Z","hostname":"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6","pid":24202,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:38.024410866Z","hostname":"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6","pid":24202,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:38.039563161Z","hostname":"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6","pid":24202,"zonename":"\"oxz_crucible_66c2c3dd-b4bb-4601-bf96-ff02edd58bf6\""}
[ Mar 30 19:27:38 Method "start" exited with status 0. ]