[ Mar 30 19:27:32 Enabled. ]
[ Mar 30 19:27:32 Rereading configuration. ]
[ Mar 30 19:27:33 Rereading configuration. ]
[ Mar 30 19:27:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:36.729578407Z","hostname":"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8","pid":23654,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:36.738240774Z","hostname":"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8","pid":23654,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:36.748134832Z","hostname":"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8","pid":23654}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:36.75360249Z","hostname":"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8","pid":23654}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:36.758826477Z","hostname":"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8","pid":23654,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:37.223521094Z","hostname":"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8","pid":23654,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-30T19:27:37.237622209Z","hostname":"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8","pid":23654,"zonename":"\"oxz_oximeter_9c1f8501-2cc9-4072-8361-3090c648ace8\""}
[ Mar 30 19:27:37 Method "start" exited with status 0. ]