| 1 | | [ Mar 30 23:25:33 Enabled. ] |
| 2 | | [ Mar 30 23:25:33 Rereading configuration. ] |
| 3 | | [ Mar 30 23:25:34 Rereading configuration. ] |
| 4 | | [ Mar 30 23:25:35 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService7 -s fd00:1122:3344:101::5 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-03-30T23:25:35.389Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService7
|
| 7 | 2026-03-30T23:25:35.395Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService7
|
| 8 | 2026-03-30T23:25:35.402Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-03-30T23:25:35.405Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-03-30T23:25:35.408Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService7"
static address = fd00:1122:3344:101::5
|
| 11 | 2026-03-30T23:25:35.863Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-03-30T23:25:35.869Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_cockroachdb_bb801a96-b21a-48e1-82be-f1f7cb7b16bc"
|
| 13 | | [ Mar 30 23:25:35 Method "start" exited with status 0. ] |