[ Mar 31 01:55:42 Enabled. ]
[ Mar 31 01:55:42 Rereading configuration. ]
[ Mar 31 01:55:48 Rereading configuration. ]
[ Mar 31 01:55:57 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.524834787Z","hostname":"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138","pid":24681,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.528774207Z","hostname":"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138","pid":24681,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.536417094Z","hostname":"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138","pid":24681}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.538989699Z","hostname":"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138","pid":24681}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.542184096Z","hostname":"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138","pid":24681,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:58.017964736Z","hostname":"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138","pid":24681,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:58.029113625Z","hostname":"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138","pid":24681,"zonename":"\"oxz_crucible_0b2612cc-5990-4aca-a574-cdace31a3138\""}
[ Mar 31 01:55:58 Method "start" exited with status 0. ]