[ Mar 31 01:55:43 Enabled. ]
[ Mar 31 01:55:43 Rereading configuration. ]
[ Mar 31 01:55:48 Rereading configuration. ]
[ Mar 31 01:55:57 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.287542813Z","hostname":"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6","pid":24655,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.295751339Z","hostname":"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6","pid":24655,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.302616632Z","hostname":"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6","pid":24655}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.306304298Z","hostname":"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6","pid":24655}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.309882931Z","hostname":"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6","pid":24655,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.778980532Z","hostname":"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6","pid":24655,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-03-31T01:55:57.785943416Z","hostname":"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6","pid":24655,"zonename":"\"oxz_oximeter_087d6730-1951-4578-8377-82cb2a035dc6\""}
[ Mar 31 01:55:57 Method "start" exited with status 0. ]