[ Apr  7 02:47:29 Enabled. ]
[ Apr  7 02:47:29 Rereading configuration. ]
[ Apr  7 02:47:32 Rereading configuration. ]
[ Apr  7 02:47:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-07T02:47:36.397145775Z","hostname":"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b","pid":23332,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-07T02:47:36.402496318Z","hostname":"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b","pid":23332,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-07T02:47:36.410703141Z","hostname":"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b","pid":23332}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-07T02:47:36.414376929Z","hostname":"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b","pid":23332}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-07T02:47:36.422061031Z","hostname":"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b","pid":23332,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-07T02:47:36.891174329Z","hostname":"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b","pid":23332,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-07T02:47:36.906820259Z","hostname":"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b","pid":23332,"zonename":"\"oxz_crucible_70e04d56-2ca5-4549-bd3f-6395c9712b9b\""}
[ Apr  7 02:47:36 Method "start" exited with status 0. ]