[ Apr 10 22:22:53 Enabled. ]
[ Apr 10 22:22:53 Rereading configuration. ]
[ Apr 10 22:22:55 Rereading configuration. ]
[ Apr 10 22:23:00 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-10T22:23:00.728511173Z","hostname":"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c","pid":24415,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-10T22:23:00.733398472Z","hostname":"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c","pid":24415,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-10T22:23:00.739873532Z","hostname":"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c","pid":24415}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-10T22:23:00.743036126Z","hostname":"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c","pid":24415}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-10T22:23:00.747397334Z","hostname":"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c","pid":24415,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-10T22:23:01.205212599Z","hostname":"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c","pid":24415,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-10T22:23:01.216591819Z","hostname":"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c","pid":24415,"zonename":"\"oxz_crucible_7b57301b-fed8-4ace-b143-2b3e779a910c\""}
[ Apr 10 22:23:01 Method "start" exited with status 0. ]