[ Apr 14 21:27:42 Enabled. ]
[ Apr 14 21:27:42 Rereading configuration. ]
[ Apr 14 21:27:45 Rereading configuration. ]
[ Apr 14 21:27:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.640308427Z","hostname":"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed","pid":24129,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.651286664Z","hostname":"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed","pid":24129,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.658233181Z","hostname":"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed","pid":24129}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.661176119Z","hostname":"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed","pid":24129}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.664020695Z","hostname":"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed","pid":24129,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:54.128420612Z","hostname":"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed","pid":24129,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:54.142603652Z","hostname":"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed","pid":24129,"zonename":"\"oxz_crucible_566f27d8-a50d-4a38-ab4f-c09c3f6597ed\""}
[ Apr 14 21:27:54 Method "start" exited with status 0. ]