[ Apr 14 21:27:42 Enabled. ]
[ Apr 14 21:27:42 Rereading configuration. ]
[ Apr 14 21:27:44 Rereading configuration. ]
[ Apr 14 21:27:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.347341884Z","hostname":"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306","pid":23939,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.353249281Z","hostname":"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306","pid":23939,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.360148757Z","hostname":"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306","pid":23939}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.362977013Z","hostname":"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306","pid":23939}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.365878601Z","hostname":"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306","pid":23939,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.828823879Z","hostname":"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306","pid":23939,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T21:27:53.841114601Z","hostname":"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306","pid":23939,"zonename":"\"oxz_crucible_8ba15cdb-2a7e-4c58-a348-e0729a46f306\""}
[ Apr 14 21:27:53 Method "start" exited with status 0. ]