[ Apr 14 23:29:32 Enabled. ]
[ Apr 14 23:29:32 Rereading configuration. ]
[ Apr 14 23:29:33 Rereading configuration. ]
[ Apr 14 23:29:43 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService8 -s fd00:1122:3344:101::6 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T23:29:43.878632548Z","hostname":"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4","pid":10367,"datalink":"oxControlService8"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T23:29:43.88489488Z","hostname":"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4","pid":10367,"datalink":"oxControlService8"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T23:29:43.89280017Z","hostname":"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4","pid":10367}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T23:29:43.896695641Z","hostname":"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4","pid":10367}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T23:29:43.900543586Z","hostname":"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4","pid":10367,"static address":"fd00:1122:3344:101::6","data link":"\"oxControlService8\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T23:29:44.35606973Z","hostname":"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4","pid":10367,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-14T23:29:44.361976701Z","hostname":"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4","pid":10367,"zonename":"\"oxz_cockroachdb_e8a19f81-9c27-4a7f-a8d8-9faa9aee4bd4\""}
[ Apr 14 23:29:44 Method "start" exited with status 0. ]