| 1 | | [ Apr 17 16:06:56 Enabled. ] |
| 2 | | [ Apr 17 16:06:56 Rereading configuration. ] |
| 3 | | [ Apr 17 16:06:57 Rereading configuration. ] |
| 4 | | [ Apr 17 16:06:57 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-04-17T16:06:57.876Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService4
|
| 7 | 2026-04-17T16:06:57.880Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService4
|
| 8 | 2026-04-17T16:06:57.886Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-04-17T16:06:57.889Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-04-17T16:06:57.892Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService4"
static address = fd00:1122:3344:101::1b
|
| 11 | 2026-04-17T16:06:58.346Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-04-17T16:06:58.352Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_ntp_6190442e-00b8-4566-a141-15433ccf3c88"
|
| 13 | | [ Apr 17 16:06:58 Method "start" exited with status 0. ] |