[ Apr 17 17:26:31 Enabled. ]
[ Apr 17 17:26:31 Rereading configuration. ]
[ Apr 17 17:26:31 Rereading configuration. ]
[ Apr 17 17:26:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService2 -s fd00:1122:3344:2::1 -g fd00:1122:3344:2::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-17T17:26:32.258345049Z","hostname":"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9","pid":5212,"datalink":"oxControlService2"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-17T17:26:32.26356685Z","hostname":"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9","pid":5212,"datalink":"oxControlService2"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-17T17:26:32.26996875Z","hostname":"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9","pid":5212}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-17T17:26:32.273084953Z","hostname":"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9","pid":5212}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-17T17:26:32.27606644Z","hostname":"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9","pid":5212,"static address":"fd00:1122:3344:2::1","data link":"\"oxControlService2\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-17T17:26:32.730131146Z","hostname":"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9","pid":5212,"gateway":"fd00:1122:3344:2::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-17T17:26:32.735361328Z","hostname":"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9","pid":5212,"zonename":"\"oxz_internal_dns_ddf318be-086e-4e78-a641-2e01f9ff82f9\""}
[ Apr 17 17:26:32 Method "start" exited with status 0. ]