[ Apr 21 16:32:24 Enabled. ]
[ Apr 21 16:32:24 Rereading configuration. ]
[ Apr 21 16:32:30 Rereading configuration. ]
[ Apr 21 16:32:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-21T16:32:36.730219425Z","hostname":"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0","pid":23741,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-21T16:32:36.735915818Z","hostname":"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0","pid":23741,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-21T16:32:36.742967321Z","hostname":"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0","pid":23741}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-21T16:32:36.746293593Z","hostname":"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0","pid":23741}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-21T16:32:36.749694447Z","hostname":"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0","pid":23741,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-21T16:32:37.238988271Z","hostname":"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0","pid":23741,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-21T16:32:37.260251322Z","hostname":"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0","pid":23741,"zonename":"\"oxz_crucible_79a01bbf-1d78-4b20-a6c5-4995ddeeecb0\""}
[ Apr 21 16:32:37 Method "start" exited with status 0. ]