[ Apr 28 21:57:34 Enabled. ]
[ Apr 28 21:57:34 Rereading configuration. ]
[ Apr 28 21:57:35 Rereading configuration. ]
[ Apr 28 21:57:40 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-28T21:57:40.266213933Z","hostname":"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6","pid":23275,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-28T21:57:40.27504289Z","hostname":"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6","pid":23275,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-28T21:57:40.286078019Z","hostname":"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6","pid":23275}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-28T21:57:40.291518622Z","hostname":"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6","pid":23275}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-28T21:57:40.29614841Z","hostname":"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6","pid":23275,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-28T21:57:40.757260468Z","hostname":"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6","pid":23275,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-28T21:57:40.767887749Z","hostname":"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6","pid":23275,"zonename":"\"oxz_oximeter_0b7b5374-743a-45d5-84c6-15f30075f3e6\""}
[ Apr 28 21:57:40 Method "start" exited with status 0. ]