[ Apr 29 21:51:29 Enabled. ]
[ Apr 29 21:51:29 Rereading configuration. ]
[ Apr 29 21:51:30 Rereading configuration. ]
[ Apr 29 21:51:33 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-04-29T21:51:33.267974895Z","hostname":"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b","pid":23199,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-04-29T21:51:33.275719527Z","hostname":"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b","pid":23199,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-04-29T21:51:33.285530224Z","hostname":"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b","pid":23199}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-04-29T21:51:33.289821115Z","hostname":"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b","pid":23199}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-04-29T21:51:33.294541871Z","hostname":"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b","pid":23199,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-04-29T21:51:33.753577875Z","hostname":"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b","pid":23199,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-04-29T21:51:33.763179179Z","hostname":"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b","pid":23199,"zonename":"\"oxz_oximeter_d57e5bba-c650-4f04-ab6e-0183af58946b\""}
[ Apr 29 21:51:33 Method "start" exited with status 0. ]