[ May  1 04:09:09 Enabled. ]
[ May  1 04:09:09 Rereading configuration. ]
[ May  1 04:09:14 Rereading configuration. ]
[ May  1 04:09:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-01T04:09:21.337715972Z","hostname":"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6","pid":22372,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-01T04:09:21.337906066Z","hostname":"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6","pid":22372,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-01T04:09:21.345502791Z","hostname":"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6","pid":22372}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-01T04:09:21.348527276Z","hostname":"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6","pid":22372}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-01T04:09:21.353057934Z","hostname":"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6","pid":22372,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-01T04:09:21.826353002Z","hostname":"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6","pid":22372,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-01T04:09:21.845454136Z","hostname":"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6","pid":22372,"zonename":"\"oxz_crucible_db0e7fd5-c55b-41ff-b83f-039c5a1af1e6\""}
[ May  1 04:09:21 Method "start" exited with status 0. ]