[ May  2 04:33:18 Enabled. ]
[ May  2 04:33:18 Rereading configuration. ]
[ May  2 04:33:20 Rereading configuration. ]
[ May  2 04:33:23 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-02T04:33:23.380622962Z","hostname":"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7","pid":23401,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-02T04:33:23.390123556Z","hostname":"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7","pid":23401,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-02T04:33:23.400831377Z","hostname":"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7","pid":23401}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-02T04:33:23.405952202Z","hostname":"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7","pid":23401}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-02T04:33:23.410436663Z","hostname":"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7","pid":23401,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-02T04:33:23.871278965Z","hostname":"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7","pid":23401,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-02T04:33:23.885989965Z","hostname":"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7","pid":23401,"zonename":"\"oxz_crucible_14e26c5a-f4f3-42d3-ab2e-bbd4974f1fb7\""}
[ May  2 04:33:23 Method "start" exited with status 0. ]