[ May 4 23:23:52 Enabled. ] [ May 4 23:23:52 Rereading configuration. ] [ May 4 23:23:53 Rereading configuration. ] [ May 4 23:24:03 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService8 -s fd00:1122:3344:101::5 -g fd00:1122:3344:101::1"). ] note: configured to log to "/dev/stderr" {"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:24:03.926141432Z","hostname":"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8","pid":10420,"datalink":"oxControlService8"} {"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:24:03.930748347Z","hostname":"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8","pid":10420,"datalink":"oxControlService8"} {"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:24:03.937433864Z","hostname":"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8","pid":10420} {"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:24:03.940309836Z","hostname":"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8","pid":10420} {"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:24:03.943299423Z","hostname":"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8","pid":10420,"static address":"fd00:1122:3344:101::5","data link":"\"oxControlService8\""} {"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:24:04.399790459Z","hostname":"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8","pid":10420,"gateway":"fd00:1122:3344:101::1"} {"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:24:04.406406913Z","hostname":"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8","pid":10420,"zonename":"\"oxz_cockroachdb_dd3c8d3f-405f-4ceb-b54f-9ebffef762c8\""} [ May 4 23:24:04 Method "start" exited with status 0. ]