[ May  4 23:55:02 Enabled. ]
[ May  4 23:55:02 Rereading configuration. ]
[ May  4 23:55:04 Rereading configuration. ]
[ May  4 23:55:08 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:55:08.357254163Z","hostname":"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c","pid":22295,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:55:08.363434585Z","hostname":"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c","pid":22295,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:55:08.373239292Z","hostname":"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c","pid":22295}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:55:08.377843203Z","hostname":"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c","pid":22295}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:55:08.382954617Z","hostname":"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c","pid":22295,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:55:08.847936585Z","hostname":"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c","pid":22295,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-04T23:55:08.860555126Z","hostname":"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c","pid":22295,"zonename":"\"oxz_crucible_5ccd4b38-a10b-4099-ac1c-1e357850bc1c\""}
[ May  4 23:55:08 Method "start" exited with status 0. ]