[ May  6 00:53:56 Enabled. ]
[ May  6 00:53:56 Rereading configuration. ]
[ May  6 00:53:57 Rereading configuration. ]
[ May  6 00:54:00 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:00.989349397Z","hostname":"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc","pid":23215,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:00.997908426Z","hostname":"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc","pid":23215,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.010634403Z","hostname":"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc","pid":23215}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.015246049Z","hostname":"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc","pid":23215}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.021237365Z","hostname":"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc","pid":23215,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.483330851Z","hostname":"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc","pid":23215,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.494442794Z","hostname":"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc","pid":23215,"zonename":"\"oxz_crucible_4e530a0e-b1d6-49af-a419-27ff83c915bc\""}
[ May  6 00:54:01 Method "start" exited with status 0. ]