[ May  6 00:53:57 Enabled. ]
[ May  6 00:53:57 Rereading configuration. ]
[ May  6 00:53:57 Rereading configuration. ]
[ May  6 00:54:01 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.301361941Z","hostname":"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40","pid":23370,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.309092453Z","hostname":"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40","pid":23370,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.318098701Z","hostname":"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40","pid":23370}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.323505545Z","hostname":"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40","pid":23370}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.329407778Z","hostname":"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40","pid":23370,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.790614166Z","hostname":"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40","pid":23370,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T00:54:01.804194041Z","hostname":"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40","pid":23370,"zonename":"\"oxz_crucible_57d3b368-de0f-4f2a-93a2-8fe00d1d2f40\""}
[ May  6 00:54:01 Method "start" exited with status 0. ]