[ May  6 01:23:10 Enabled. ]
[ May  6 01:23:10 Rereading configuration. ]
[ May  6 01:23:11 Rereading configuration. ]
[ May  6 01:23:13 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T01:23:13.872066093Z","hostname":"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6","pid":22410,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T01:23:13.883415243Z","hostname":"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6","pid":22410,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T01:23:13.895775493Z","hostname":"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6","pid":22410}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T01:23:13.901743714Z","hostname":"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6","pid":22410}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T01:23:13.906829017Z","hostname":"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6","pid":22410,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T01:23:14.374487718Z","hostname":"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6","pid":22410,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T01:23:14.388840488Z","hostname":"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6","pid":22410,"zonename":"\"oxz_oximeter_8cc424cd-74a4-488c-b3eb-409a4277d3d6\""}
[ May  6 01:23:14 Method "start" exited with status 0. ]