[ May  6 05:22:23 Enabled. ]
[ May  6 05:22:24 Rereading configuration. ]
[ May  6 05:22:24 Rereading configuration. ]
[ May  6 05:22:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:22:27.890700989Z","hostname":"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b","pid":22811,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:22:27.899013239Z","hostname":"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b","pid":22811,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:22:27.908999447Z","hostname":"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b","pid":22811}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:22:27.914885831Z","hostname":"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b","pid":22811}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:22:27.920690454Z","hostname":"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b","pid":22811,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:22:28.380230414Z","hostname":"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b","pid":22811,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:22:28.394431483Z","hostname":"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b","pid":22811,"zonename":"\"oxz_crucible_f9faed74-1e1d-47a1-a75a-67d4caa0071b\""}
[ May  6 05:22:28 Method "start" exited with status 0. ]