[ May  6 05:52:25 Enabled. ]
[ May  6 05:52:25 Rereading configuration. ]
[ May  6 05:52:27 Rereading configuration. ]
[ May  6 05:52:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:52:32.176613036Z","hostname":"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8","pid":23376,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:52:32.184008453Z","hostname":"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8","pid":23376,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:52:32.19338348Z","hostname":"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8","pid":23376}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:52:32.197400029Z","hostname":"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8","pid":23376}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:52:32.202431309Z","hostname":"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8","pid":23376,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:52:32.662150627Z","hostname":"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8","pid":23376,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T05:52:32.668670787Z","hostname":"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8","pid":23376,"zonename":"\"oxz_oximeter_021ac49d-bb21-4bfb-be26-5b3dca8fa3c8\""}
[ May  6 05:52:32 Method "start" exited with status 0. ]