[ May  6 06:51:09 Enabled. ]
[ May  6 06:51:09 Rereading configuration. ]
[ May  6 06:51:12 Rereading configuration. ]
[ May  6 06:51:15 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T06:51:15.701937902Z","hostname":"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e","pid":24140,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T06:51:15.702373314Z","hostname":"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e","pid":24140,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T06:51:15.712961613Z","hostname":"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e","pid":24140}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T06:51:15.719046025Z","hostname":"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e","pid":24140}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T06:51:15.724115518Z","hostname":"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e","pid":24140,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T06:51:16.192408308Z","hostname":"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e","pid":24140,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T06:51:16.208986524Z","hostname":"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e","pid":24140,"zonename":"\"oxz_crucible_85ced3d5-0d27-40e2-9b3d-35fec782c26e\""}
[ May  6 06:51:16 Method "start" exited with status 0. ]