[ May  6 21:08:44 Enabled. ]
[ May  6 21:08:44 Rereading configuration. ]
[ May  6 21:08:47 Rereading configuration. ]
[ May  6 21:08:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T21:08:51.491062997Z","hostname":"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1","pid":23924,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T21:08:51.491305671Z","hostname":"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1","pid":23924,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T21:08:51.497907674Z","hostname":"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1","pid":23924}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T21:08:51.501663162Z","hostname":"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1","pid":23924}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T21:08:51.506138851Z","hostname":"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1","pid":23924,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T21:08:51.979141769Z","hostname":"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1","pid":23924,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-06T21:08:52.000936097Z","hostname":"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1","pid":23924,"zonename":"\"oxz_crucible_e9741d46-c66a-4862-96f9-051a71ff19d1\""}
[ May  6 21:08:52 Method "start" exited with status 0. ]