[ May  8 13:59:12 Enabled. ]
[ May  8 13:59:12 Rereading configuration. ]
[ May  8 13:59:14 Rereading configuration. ]
[ May  8 13:59:17 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T13:59:18.072415579Z","hostname":"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281","pid":24315,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T13:59:18.080197796Z","hostname":"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281","pid":24315,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T13:59:18.090148445Z","hostname":"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281","pid":24315}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T13:59:18.094329964Z","hostname":"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281","pid":24315}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T13:59:18.09885594Z","hostname":"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281","pid":24315,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T13:59:18.558964498Z","hostname":"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281","pid":24315,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T13:59:18.566599463Z","hostname":"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281","pid":24315,"zonename":"\"oxz_oximeter_e18138eb-4b54-4566-bd1e-35c4a5c9d281\""}
[ May  8 13:59:18 Method "start" exited with status 0. ]