[ May  8 08:08:39 Enabled. ]
[ May  8 08:08:39 Rereading configuration. ]
[ May  8 08:08:40 Rereading configuration. ]
[ May  8 08:08:43 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T08:08:43.490768677Z","hostname":"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944","pid":23354,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T08:08:43.499628551Z","hostname":"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944","pid":23354,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T08:08:43.510146403Z","hostname":"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944","pid":23354}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T08:08:43.514864035Z","hostname":"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944","pid":23354}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T08:08:43.521964488Z","hostname":"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944","pid":23354,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T08:08:43.991074097Z","hostname":"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944","pid":23354,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T08:08:44.019320406Z","hostname":"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944","pid":23354,"zonename":"\"oxz_crucible_f4d96519-b8fe-4af2-afac-2751de06f944\""}
[ May  8 08:08:44 Method "start" exited with status 0. ]