[ May  8 16:55:02 Enabled. ]
[ May  8 16:55:02 Rereading configuration. ]
[ May  8 16:55:04 Rereading configuration. ]
[ May  8 16:55:06 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.071143676Z","hostname":"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c","pid":22394,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.081988109Z","hostname":"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c","pid":22394,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.095099842Z","hostname":"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c","pid":22394}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.100677822Z","hostname":"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c","pid":22394}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.107767563Z","hostname":"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c","pid":22394,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.581773316Z","hostname":"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c","pid":22394,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-08T16:55:07.595018592Z","hostname":"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c","pid":22394,"zonename":"\"oxz_crucible_04c10a98-82cf-4365-8c09-bff45fe2dc9c\""}
[ May  8 16:55:07 Method "start" exited with status 0. ]